#Molex connector voltage manual
The manual explains it is there for modern, high power consuming cards, which do not have their own power connector on the card. The 4 pin molex power connector on motherboards is found near the PCIe 16X slot is used for additional power for the video card in that slot. It connects newer SATA internal hard drives, optical drives, and motherboards to a power supply with legacy LP4, 4-pin Molex connectors. The Cable Matters 4-Pin Molex to SATA Power Cable Adapter is a handy addition to your toolbox when building, upgrading or repairing computers. They only need the two lines you are giving them.ĪDVERTISEMENT Can I plug Molex into SATA? Then plug your hard drive into the other end, and you’re good to go. Instead, all you need to do is plug the adapter into your PSU.
By going this route, you won’t need to worry about swapping out your power supply. Can I convert Molex to SATA?Īnother option is to use a molex to SATA adapter cable.
#Molex connector voltage Pc
The Molex connectors bring DC power to the drives inside a PC case. The Molex connector is used for power connections for a disk drive in a computer as well as for other computer components such as CD-ROM’s, graphic cards etc. What is the purpose of the 4 pin Molex connector? What are the different color cables found in Molex connector? The male part of the fan is just so you don’t lose a connector by using the fan and can connect to any other molex female connector in your setup to supply power. The female part of the Fan-Molex-Connector to the male connector of the PSU. The molex connectors are to connect the fans directly to the PSU. Compatible connectors are available from many manufacturers, not just Molex and AMP. What connector has 4 pins is used for older IDE drives?Ĭertain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more.What is the function of 4 pin Molex P4 12V?.What is the purpose of the 4 pin Molex connector?.What are the different color cables found in Molex connector?.The SATA power connector includes a 3.3 volt rail as well as the traditional 5 volt and 12 volt rails. A Molex to SATA connector should be fine for most HDDs and DVD Drives but it may not be sufficient for more modern SSDs and BluRay drives. In the same way Should I use Molex to SATA? Safe, yes. The large one on the right is used for disk, CD-ROM and DVD drives, while the small connector is used for floppy drives and other devices.Īlso, What type of device would you connect a Molex cable to?Ĭertain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. These « Molex » connectors bring DC power to the drives inside a PC case. In addition, What does a Molex plug into? Then you use molex connectors to connect the fans to your power supply rather than the motherboard. Molex connectors are necessary when you don’t have any 3 pin headers left on your board to connect fans.
0 kommentar(er)
